Laser Processing Head PDT
Product Data
Optical System| Focusing system (magnification @ focal length) * | 0.75 @ 150 mm, 1.00 @ 200 mm, 1.70 @ 340 mm, 3.30 @ 660 mm |
| Collimation system (magnification @ focal length) * | 1.8 @ 110 mm, 2.0 @ 100 mm, 2.3 @ 90 mm, 3.0 @ 70 mm |
| Max. average laser power | 6 kW |
| Max. beam parameter acceptance (half angle) of laser light exiting fiber | 97% power content within 125 or 210 mrad |
| Wave length | 800 - 950 nm 1020 - 1080 nm |
| Transmission | > 95% |
| Core diameter laser light cable | 300 - 1000 μm (typical) |
| Laser light cable receiver * | HIGHYAG LLK, LLK-Auto, LLK-B, QBH |
Seam Tracking
| Swiveling angle of focusing unit | 200° |
| Useable Z stroke (tactile sensor, focus position) - welding - brazing | 5 mm (10 mm with auto focus) 15 mm |
| Adjustable range of laser light cable receiver | 360° |
Wire Feeding System
| Support for wire feeder | On request, e.g. Binzel, Fronius |
| Suitable for hot wire up to | 200 A |
Dimensions
| Size (W x D x H) - PDT with integrated periphal equipment - PDT in compact design | Approx. 800 x 430 x 540 mm Approx. 410 x 180 x 540 mm |
| Weight | Approx. 11 - 25 kg (depending on configuration) |
Supply
| Electrical * | DC 24 V, 5 A |
| Pneumatics | <= 1.0 MPa Crossjet: <= 1.0 MPa, approx. 500 l/min @ 0.6 MPa |
| Shielding gas | On request, approx. 5 - 40 l/min, 0.6 MPa |
| Cooling | Flow rate 2 l/min, temperature 15 - 35 °C (avoiding condensation) |
| PLC/field bus system * | Hard wired |
Subject to change without prior notice
*Others on request
